Armorcast Terraform index

*Note: Armorcast have discontinued the Terraform line of resin buildings and terrain accessories. Our remaining stocks are very low, we will post an updated listing of remaining stocks when time permits. Due to high demand, we cannot do stock checks at this time.

6MM (1/285TH SCALE) FORTIFICATIONS

(1911) 6mm scale (1/285 scale) Infantry Emplacements

Artist: Drew Williams
The 2.5" diameter hexagonal emplacements are supported by corrugated steel and wood posts. There are small bunkers at the rear and trench openings for troop access.

(1912) 6mm scale (1/285 scale) Vehicle Emplacements

Artist: Drew Williams
This set contains two small (1.5" x 1.75"), two medium (1.75" x 2"), and one large (2" x 2.4") vehicle emplacements. All emplacements have corrugated steel walls supported by wood posts with tread plate detail on the floors. Three of the emplacements have sandbag trim on top of the dirt berms. These pieces have lots of detail and drybrush well.

Bridges, Statues, and Obelisks
(809) Large Wooden Bridge Artist: Cal Garton The wood bridge is 8.5" long by 5" with a 4.25" wide roadway. The bridge has a wooden plank floor, with heavy beams and planks making up the side rails. The entire bridge has heavy wood grain detail, making it easy to drybrush. Usable for many time periods and game systems.	(811) Medium Stone Bridge Artist: Shawn Lux The stone bridge is 7.75" by 4" with a 3.25" wide road-way. The bridge has stone and mortar floors and side rails. Pronounced stone detail makes it easy to drybrush. Usable for many time periods and game systems.
(810) Stone Bridge with Gargoyles	(815) Tech Bridge
(820) Bridge of Skulls
(860) Skull Obelisk	(861) Bone Obelisk
(870) Bone Walls 1	(871) Bone Walls 2
(875) Skull Piles	(876) Small Skull Piles (3 pieces) Artist: Shawn Lux These are three different smaller versions of the original skull piles measuring from 1.5"-2" wide by 3" long. As usual, lots of skulls and bones (and a soccer ball) to drybrush.

CONTAINERS
Crates and Boxes
(310) Small Wood Crate Set (9 pieces)	(312) Medium Wood Crate Set (6 pieces)
(314) Medium Vertical Wood Crate Set (4 pieces)	(316) Medium Vertical Metal Crate Set (4 pieces)
Larger Containers
(320) Large Wood Crates (4 pieces)	(322) Large Metal Crates (4 pieces)
(324) Large Vertical Wood Crates (3 pieces)	(326) Large Vertical Metal Crates (3 pieces)
Small Crate Stacks
(340) Small Crate Stack 1 (2 pieces)	(342) Small Crates Stack 2 (2 pieces)
Medium Crate Stacks
(343) Medium Crate Stack 1 (1 pieces)	(344) Medium Crates Stack 2 (1 pieces)
(345) Medium Crate Stack 3 (1 pieces)	(346) Medium Crates Stack 4 (1 pieces)
Barrels and Shipping Drums
(380) Barrels and Drums (7 pieces)	(382) Wooden Barrels (7 pieces)

FEUDAL JAPAN

(970) Japanese Bridge

(971) Japanese Arch

(972) Japanese Lanterns: (3 pieces)

(973) Short Bamboo Walls	(974) Tall Bamboo Walls
Artist: Cal Garton These are 6" long bamboo walls in 1" and 2" heights made from double rows of small scale bamboo branches with wood posts at each end.

(975) Wooden Gates

Artist: Cal Garton
The taller gate is 4" tall and 2.75" wide. The smaller one is 2.5" tall and 2.75" wide. These gates were designed for use with the bamboo walls above, but can be used with any walls. All timbers have with wood grain detail. Iron hardware and vines and plants around the bases complete the deta.

Licensed Clan War® Terrain
(990) Samurai Walls With Gate

Artists: David Garton, Cal Garton
This walled enclosure is designed for use with AEG's Clan War game, but will complement any feudal Japan tabletop. The walls have a quarry stone base and bamboo upper half capped with a wooden beam. The set contains: one arched gate with separate doors, and two 4" walls and six 6"walls. An Armorcast Japanese obelisk is also included. The whole set has great detail and drybrushes well.

Fortifications
(710) Trench Starter Set	(711) Weapons Pit
(712) Straight (1) and Corner (2) Trenches	(713) T-Intersection Trenches (2)
(714) Straight Trenches (2)	(715) 45° Trench Corners (2 pieces)
(716) Trench Ends (6)	(718) Small Weapon Pits
(720) Sandbag Bunker
(721) Sandbag Emplacement	(722) Concrete Bunker
(725) Wide Trenches-Corners: (2)	(726) Wide Trenches Con. Straights: (2)
(727) Wide Trenches-Wide Straights: (2)	(728) Vehicle Emplacement: (1)
(6032) Modular Weapons Bunker	(6032) Modular Weapons Bunker with Modular Cannon (6023) (6032) does not come with the cannon

SCI-FI TERRAIN
(210) Rubble Piles 1 (2 pieces) (Improved!) 1" tall brick and scrap piles	(218) Large Rubble Pile (1 piece) 3" tall pile of vehicle parts and other junk
Small Tanks and Generators:
(220) 3 Round Tank Unit: Tri-Tank Fuel Cell (1 piece)	(222) 1 1/2" Tall Cryo Generator and Small Power Unit (2 pieces)
(224) 1" to 1 1/2" Tall Units: Cryo Tank, Fuel Processor, Oil Storage. (3 pieces)
Large Tanks and Generators:
(230) 3 Round Tank Unit: Tri-Tank Fuel Cell (1 piece)	(232) Large Cryo Generator (1 piece) This item is no longer Available
(234) Large Fuel Processor (1 piece) This item is no longer Available	(236) Large Cryo Tanks (2 pieces)
(240) Power Grid (2 pieces)

TOOLS AND MACHINERY
(510) Mechanic's Pack (8 pieces)	(520) Double Check Valve (1 piece)
(521) Propane Tank Artist: Cal Garton The propane tank is made from riveted metal plates with additional hose and gauge detail. The base is concrete covered with vines and other vegetation. The propane tank has patches, dents and dings with lots of detail for dry-brushing. The propane tank is 4" long, 1" wide and 1.5" tall.
(530)Transformers (2 pieces)
(550) Control Panels (3 pieces)	(552) Radar Dish This item is no longer Available
(551) Air Duct Vent: (1 piece) This item is no longer Available

CATHEDRAL DESIGNS AND LAYOUT
Shown below are three possible cathedral layout diagrams, from a basic rectangle (6" x 9") to full cruciform (cross shaped) cathedrals (12" x 15" and 12" x 18").

In the diagrams the end walls are indicated by their part number (882, 883). The numbers in parentheses are corresponding Ruined Cathedral part numbers. The short panels are indicated by individual piece, not the part numbers: Part number 880 contains 2 Straight panels, part number 881 contains one Straight panel and one Corner panel and part number 884 will contain two Inside Corner panels. Part number 886 Cathedral Roof will be the roof for the Rectangular Cathedral. Additional #886 kits will be required for the larger cathedrals.
S = Straight Panel
C = Corner Panel
IC = Inside Corner Panel

CATHEDRAL DESIGN OPTIONS
The two 883 Cathedral End Walls on the sides of the cruciform cathedrals can be replaced by 882 Cathedral Front Wall if you would like doors on the sides of the cathedral. These additional doors are common on larger Gothic cathedrals.

Rectangular Cathedral (6" x 9") Rectangular Cathedral requires: 1x 882 Cathedral Front Wall 1x 883 Cathedral End Wall 1x 880 Cathedral Straight Wall 2x 881 Cathedral Corner 1x 886 Cathedral Roof
Cruciform Cathedral 1 (12" x 15") Cruciform Cathedral 1 requires: 1x 882 Cathedral Front Wall 3x 883 Cathedral End Wall 4x 881 Cathedral Corner 2x 884 Cathedral Inside Corner 4x 886 Cathedral Roof (much custom cutting required)
Cruciform Cathedral 2 (12" x 18") Cruciform Cathedral 2 requires: 1x 882 Cathedral Front Wall 3x 883 Cathedral End Wall 4x 881 Cathedral Corner 2x 884 Cathedral Inside Corner 4x 886 Cathedral Roof (much custom cutting required)

Rivers
(490) River Set (8 pieces - 48")
(491) River Straights (1x6" and 1x8")
(492) River Curves (1x4.5" and 1x7")
(493) River Spring /Y Intersection	(494) 3" River Roman Spring
(496) 4" River Straight and Curve (1 x 5" & 1 x 7")	(497) 4"-3" River Transitions
(498) 4" River to 3" Ys (2 x6")	(499) River Swamp (1 x10")